Interview Questions

How to add a client or server computer?

Rational Robot FAQ


(Continued from previous question...)

How to add a client or server computer?

If you are using network or proxy recording, and the computer that you want to use is not listed in the Method Network and Method Proxy tabs, you can add it to the list.

  1. Click Tools > Session Record Options
  2. Click the Method:Network tab or Method:Proxy tab, depending on whether you are adding a computer for network or proxy recording.
  3. Click Manage Computers.
  4. Click New.
  5. In the Name box of the Computers group, type a name to associate with the network name of the computer that you are adding. You can assign any name up to 40 characters.
  6. Type the computer’s network name.
  7. Optionally, click Ping to make sure that the network name you just typed is correct. If it is correct, -Successful Ping of network name- appears in the status bar.
  8. Select Client System to list this computer as a client. Select Server System to list this computer as a server. You can select both choices.
  9. Click Add.
  10. Take the following steps to use a port number with the network name. A port number is required for servers used in proxy recording:
    a. In the Ports Ports Ports Ports group, type a name to associate with the port number that you are adding. You can assign any name up to 40 characters.
    b. Type the port number to use with the computer’s network name.
    c. Click Apply, then OK .
  11. Click Close Close Close Close.

(Continued on next question...)

Other Interview Questions