background image
<< Test Plans - Documenting manual tests in the testplan | Enabling Extensions for Applications Under Test >>
Test Plans - Mark the test complete
<< Test Plans - Documenting manual tests in the testplan | Enabling Extensions for Applications Under Test >>
68
User's Guide
2 C
REATING
T
ESTPLANS
Documenting manual tests in the testplan
3
Select a manual test and document it.
For more information about Pass/Fail reports, see "Generating a testplan
Pass/Fail report" on page 162. For more information about Completion
reports, see "Measuring testplan completion" on page 256.
To
Do this
Mark the test complete
Select the Complete radio button. "Complete"
means that a test has been defined. A manual
test marked here as Complete will be tabulated
as complete in Completion reports.
Indicate whether the test
passed or failed
Select the Has Been Run radio button, select
Passed or Failed, specify when the test was run,
and, optionally, specify the machine. To specify
when the test was run, use this syntax:
YYYY-MM-DD HH:MM:SS
(Hours, minutes, and seconds are optional.) For
example, enter
1996-10-01
to indicate the test
was run Oct 1, 1996.
Manual tests marked as Passed or Failed will be
tabulated as such in Pass/Fail reports, as long as
you have also specified the time they were run.
(A test marked Has Been Run is also considered
complete in Completion reports.)
Add any comments you
want about the test
Fill in the Comments text field.